Milenco Mirror Covers – Chrome – Short Arm Mirrors – Pair (5449) – Ducato/Relay/Boxer 2007+ - The Ultimate Caravan Accessory

Milenco Mirror Covers in chrome are precision-moulded covers that fit over the short-arm mirror housings on Fiat Ducato, Peugeot Boxer and Citroën Relay vans from 2007 onwards, giving the mirrors a cleaner, factory-style finish in minutes.

What they do

Beyond the cosmetic chrome upgrade, the covers help protect the mirror shell underneath from light scuffs. They're fitted with pre-applied 3M self-adhesive tape, so there's no drilling involved — just careful positioning and a firm press to bond them in place. Because they sit over the top of the existing mirror shell, they're also a quick way to smarten up a van with a few marks on the mirror housings without having to replace the mirror itself.

Compatibility

These covers are for short-arm mirrors only, on 2007-onwards Ducato, Boxer and Relay models. If your van has wide-arm motorhome mirrors instead, Milenco lists a separate wide-arm version (product code 5432) — fitting the wrong pair means they won't sit flush, so it's worth double-checking which arm type your mirrors use before ordering. They're sold as a pair (left and right), with the 3M adhesive tape pre-applied, and conform to vehicle safety standards.

What's in the box

You get two chrome mirror covers (short arm) with the 3M adhesive tape already applied to the underside, ready to fit.

Fitting notes

Milenco recommends test-fitting first, then cleaning the mirror housings with isopropyl alcohol and making sure they're fully dry before bonding. In cold weather, warming the adhesive and mirror surface slightly helps the bond take hold. Align each cover carefully, press firmly for 30-60 seconds, and allow the adhesive to cure — avoid power-washing the area for 24 hours afterwards. Waxes and silicone dressings should be kept off the bonding area, as they'll stop the tape sticking properly and can cause the cover to lift over time.

Product code: 5449.